The Incredible Hulk
Fixing
Museum
Problem:
Game stops working and seems to be crashing in the middle of gameplay. You can play for a while and then the displays and kickers go completely dead. Power cycling the game fixes the issue briefly.
Check/replace lights:
1 month, 3 weeks ago
Star Trip
Broken
Museum
Problem:
Right flipper completely non-functional.
Check/replace lights:
1 month, 3 weeks ago
Tempest (Arcade Game)
Broken
Museum
Problem:
ROM error in Self Test. Code A suggests ROM in P1 on the Analog Vector-Generator PCB. Likely minor / unrelated to #494
Check/replace lights:
1 week, 1 day ago
Hokus Pokus
Good
Museum
Problem:
Pop bumper light is out
Check/replace lights:
2 months ago
Fireball (EM)
Good
Museum
Problem:
Level machine
Check/replace lights:
Unknown
Fireball (Home Edition)
Good
Museum
Problem:
Pop bumpers could be adjusted to be a little more sensitive.
Double bonus switch could be adjusted to be a little more sensitive.
Game plays perfectly fine, even without these adjustments.
Check/replace lights:
1 day, 19 hours ago
Dr. Dude and His Excellent Ray
Good
Museum
Problem:
Some GI lights are out. Replaced bulbs and that didn’t fix the issue. Checked for continuity on fuses and they were all fine. Inspected the backbox and found a scorched wire.
Check/replace lights:
4 days, 18 hours ago
Revenge From Mars
Good
Museum
Problem:
Replace over-bright bulb (LED?) in back of playfield
Check/replace lights:
1 week, 1 day ago
The Getaway: High Speed II
Good
Museum
Problem:
The "2x" light, Green Light, and two of the lights on the pop bumpers are not working--bulbs are fine, we suspect an issue with the connection.
Check/replace lights:
1 month, 3 weeks ago
Add-A-Ball
Good
Museum
Problem:
1. Disconnected solder on the "Selection 1 arrow" light (photos marked in green)
2. Also appears none of the "Selection" lights are working. Bulbs are in find shape so likely a connection (photo marked in blue)
Check/replace lights:
Unknown
Stock Car
Good
Museum
Problem:
A few light sockets and/or related wiring is causing some bulbs to be dimly light or flashing, those are as follows:
- Rollover 10
- Clock 3, 6, and 7
The clock light 5, I was unable to place a new bulb within. This will need to be looked at as there is something in the socket that is preventing it from allowing a bulb to sit all the way in. Noting that the old bulb did look corroded and was difficult to remove.
Check/replace lights:
2 weeks, 6 days ago
Blackout
Good
Museum
Problem:
GI lighting is “blacked out” again
Check/replace lights:
2 weeks, 6 days ago
Indiana Jones: The Pinball Adventure
Good
Museum
Problem:
Volume just randomly spikes in the middle of play, and then readjusted. There seems to be nothing in particular that caused it, just started the game and the volume spiked. Tested it and it hasn’t happened again.
Check/replace lights:
1 month, 2 weeks ago
Trade Winds
Good
Museum
Problem:
Figure out a safe way to have the Special hole sensor and rod work again
Check/replace lights:
4 weeks, 1 day ago
Medieval Madness
Good
Museum
Problem:
Ball can get stuck on this switch if it enters the left inlane slowly (which usually doesn’t happen) but should be addressed
Check/replace lights:
1 month, 3 weeks ago
Cyclone
Good
Museum
Problem:
When the Mystery Wheel stops spinning the game awards something different than what the clown is pointing to.
Check/replace lights:
1 month, 1 week ago
Ballyhoo
Good
Museum
Problem:
Machine is down to 7 of 10 pinballs, size 5/8"
Check/replace lights:
Unknown
Sankyo Type II Pachinko
Good
Museum
Problem:
This thing gets jammed up all the time. Someone needs to spend time running a lot of balls through it and seeing what isn't reliable. Ask William to show you what the deal is
Check/replace lights:
Unknown
Lightning
Good
Museum
Problem:
Tiny tilt display ball has gone missing
Check/replace lights:
Unknown
Comet
Good
Museum
Problem:
While no game is being played, periodically seems to be cycling through some components getting triggered, as if a ball is trying to launch. It appears that the plunger is automatically going off. It’s hard to tell if any other component is getting triggered as I haven’t been able to time it to watch for it to happen.
Check/replace lights:
2 months ago
Twilight Zone
Good
Museum
Problem:
Some lamps do not work after being replaced with new 555 bulbs (multiball arrow, 5 million targets)
Check/replace lights:
3 weeks, 1 day ago
Derby Day
Good
Museum
Problem:
Replace wire nuts on coin door with better connectors
Check/replace lights:
3 weeks, 6 days ago
Aztec (EM)
Good
Museum
Check/replace lights:
1 month, 2 weeks ago
Classic Pin Bagatelle
Good
Museum
Check/replace lights:
Unknown
Eight Ball Deluxe Limited Edition
Good
Museum
Check/replace lights:
2 months ago
Godzilla (Premium)
Good
Museum
Check/replace lights:
1 day, 19 hours ago
High Score
Good
Museum
Check/replace lights:
Unknown
Hyperball
Good
Museum
Check/replace lights:
Unknown
Kicker
Good
Museum
Check/replace lights:
1 month, 3 weeks ago
Monopoly
Good
Museum
Check/replace lights:
Unknown
Ms. Pac-Man (Arcade Game)
Good
Museum
Check/replace lights:
Unknown
Push-On: The Prophets of the Extra-Life
Good
Museum
Check/replace lights:
Unknown
Star Trek
Good
Museum
Check/replace lights:
1 week, 1 day ago
Teacher's Pet
Good
Museum
Check/replace lights:
Unknown
Space Cadet 3D
Good
Museum
Check/replace lights:
Unknown
Login