Cleaned the plunger–it was really dirty. After cleaning it was much smoother.
Routine: Clean the playfield
Guest made me aware of a stuck ball from the previous day, I removed it.
The plunger feels “sticky”. Doesn’t have that smooth feel when pulling back. It can still plunge the ball up to the top of playfield, but will need to be properly examined.
Upper flipper wasn’t consistently returning to the resting position: the metal plunger tip had mushroomed. Used Dremel to clean up the plunger tip and replaced the plastic sleeve.
Also, replaced all of the flipper elastic bands.
Leveled playfield, machine was leaning hard to the left. I was able to lift it up and even it out to the best of my ability.
Flipper rubbers need cleaning or perhaps replacement
Replaced. LED was there, used #906 as replacement
Clipped LED socket back into holder