All Activity Problems Logs Parts
Work

Status changed: Broken → Good

Work

Per William, too many balls were installed

Closed Problem: On game start, shoots out 3 balls immediately
Work

Status changed: Fixing → Broken

Problem Closed Unplayable

On game start, shoots out 3 balls immediately

Latest: Per William, too many balls were installed
Work

Routine: Check/replace lights

Work

It appeared that all lights + flashers were working successfully

Closed Problem: Bunch of lights don't work (highlighted in manual photo) [fixed] All of the run over switches also do not work. There is also a mysterious group of wires not connected to anywhere, we are unsure where it should be connected to or if it needs to be connected to anything at all. Currently thinking if we can solve the other issues then we can just leave it? [solved, goes to the backglass!!]
Work

Replaced 3 tollover switches (left in and outlane and one of the rollovers at the top right of the platfield)

Work

As part of intake checklist confirmed all switches were working BUT, the left in and outlanes are still a bit finicky. I got it to a point where i couldn’t reproduce a non-register, but not 100% sure this wont crop back up.

The microswitches work, but maybe the connection inside them isn’t perfect anymore and they should be replaced?

Video poster
Work

Remounted/positioned the outlane switch assembly to the playfield.

Closed Problem: Left out and in lane switches aren’t triggering.
Work

Closed problem report

Closed Problem: Replace wrong bulb socket