Work
Replaced remaining LEDs with proper #1251 bulbs. All LEDs have been replaced.
Work
Gave Cyclone a bit more love today:
- One flipper bat was cracked and the other dirty, so I swapped them for the identical Williams flippers that Dr. Dude arrived with. I also cleaned the plastic sleeve in the left flipper coil.
- Waxed and cleaned the playfield.
- Cleaned the ball path on the plastic ramps
- Swapped an LED flasher I missed for an #89
Work
Wheel was behaving worse today. Wheel motor sounds scratchy. Cleaned opto with q-tip and alcohol and that helped but I think the problem could be the motor, power or the interconnect board.
Parts Request #62
Received
https://www.marcospecialties.com/pinball-parts/04-1251
We need three #1251 bulbs to replace a few LEDs that are installed.
Problem
Open
Minor
When the Mystery Wheel stops spinning the game awards something different than what the clown is pointing to.
Work
Replaced almost every LED with an incandescent bulb. The only LEDs remaining are three bulbs under the playfield that need to be swapped for #1251s
Work
Re-leveled the game, replaced the ball
Loading...