All Activity Problems Logs Parts
Update to Parts Request #78 Received

Status changed: Requested → Received

Received Part Request: Two pop bumper lights are out. I verified the lights are ok which leads me …
Parts Request #78 Received

Two pop bumper lights are out. I verified the lights are ok which leads me to believe it is a lamp holder issue.

The lamp holders are a-11199

2x

https://www.pinballlife.com/pop-bumper-lamp-…

Latest: Status changed: Requested → Received
Work

Pictures of the lights that are out. I replaced the pop bumper lamps (which were burnt out) but they are still not lighting up. Check connections.

Photo
Photo
Open Problem: The "2x" light, Green Light, and two of the lights on the pop bumpers are not working--bulbs are fine, we suspect an issue with the connection.
Work

Printed reproduction instruction cards because one was missing

Problem Open Minor

The “2x” light, Green Light, and two of the lights on the pop bumpers are not working–bulbs are fine, we suspect an issue with the connection.

Latest: Pictures of the lights that are out. I replaced the pop bumper lamps (which were …
Work 0.25h ·

Replaced socket, working good now.

Video poster
Closed Problem: Burn Rubber lamp and Red stoplight lamp are out. Tried replacing bulbs but that did not fix the issue
Work

Closed problem report

Closed Problem: Both flipper bats have cracks in the plastic, we should replace them
Work

Status changed: Fixing → Good

Work 0.2h ·

Accidentally knocked this switch off the assembly. I reattached it.

Photo
Work 1h ·

Replaced right flipper pawl with new pawl using existing linkage.

Closed Problem: Notched end washer popped off of part of the flipper assembly. I cannot reattach it successfully. This happened as I was tightening the right flipper bat in place. Took photo of how it should look with the left flipper.