Upon completion of flipper rebuild i hit the right flipper and it got “stuck” drawing high power. Subsequently, flipper died. Im pretty sure the continuous high power draw to the solenoid shorted something upstream, but i didnt have time to investigate thoroughly.

One additional note, i desoldered some wires on the solenoid on the flipper assembly switch stack. Im confident I resoldered them in the right positions, but it was getting to the end of the day.

Attached are pictures of the wiring before i unhooked any of it.

Ball is not ejecting. Rebooting did not resolve the issue.

Red drop target bank not always resetuing

Ball does not advance to the shooter lane on game start.

Flippers are on even when game is over. The flipper ground relay is for some reason now active even without a game running. Since I recently reflowed its output pins, it’s worth checking those first.

Pressing the left flipper causes the machine to say “mission completed”, doesn’t award points 🧐

Flippers misaligned, still playable

Flipper buttons are dirty/crusty. Could use a thorough cleaning.

Left flipper too weak for smooth play

Green lights on playfield not flush