A few light sockets and/or related wiring is causing some bulbs to be dimly light or flashing, those are as follows:
- Rollover 10
- Clock 3, 6, and 7
The clock light 5, I was unable to place a new bulb within. This will need to be looked at as there is something in the socket that is preventing it from allowing a bulb to sit all the way in. Noting that the old bulb did look corroded and was difficult to remove.
Dial no longer scores
Hitting the clock spinning flipper in the center causes motor to spin indefinitely. Does not score.
100 point targets also do not score.
Game will not power on
Gets stuck in some sort of boot loop, firing the ball counter decrement solenoid over and over. Triggering the first point relay breaks it out of the loop. More study of the schematic may yield hypotheses.
After first ball of game drains, machine does not initiate the next ball and the cabinet makes a ticking sound
Power cord is miswired, so some elements are hot at 120V even when the machine is switched off.
Gives the player 100 points when using flippers 80% of the time
It has no start button.
The Pinball Capital guys suggested we wire the coin return button to act as coin received.