The Flip

Location changed: Workshop → Museum

Status changed: Fixing → Good

Soil wasnt well aligned and had worked itself loose.

Closed Problem: The under field relay that controls the top most light under the right ball lock makes a loud buzzing sound when it is engaged

It sounded like the buzzing might have been coming from the coil. I tightened it down as best I could, this didnt resolve the problem though.

Closed Problem: The under field relay that controls the top most light under the right ball lock makes a loud buzzing sound when it is engaged

Closed problem report

Closed Problem: The 4th from the left under playfield relay (“lite rte 1”) is getting activated when the release wotan muchroom bumper leaf swith is closed, but it isnt staying energizing hard enough to keep the circut closed. I think the issue is mechanical. There is some play in the opposite direction from which the switch closes (pushing it left as opposed to right). Ruled out the spring on the bottom of the relay and the little hook the spring grabs on, but didnt get farther component swapping with another correctly functioning relay than that

Got the switch stack tightened up and the relay is staying engaged now but it is making a loud buzzing noise…… maybe the relay’s coul isnt tight enough and/or misaligned

Closed Problem: The 4th from the left under playfield relay (“lite rte 1”) is getting activated when the release wotan muchroom bumper leaf swith is closed, but it isnt staying energizing hard enough to keep the circut closed. I think the issue is mechanical. There is some play in the opposite direction from which the switch closes (pushing it left as opposed to right). Ruled out the spring on the bottom of the relay and the little hook the spring grabs on, but didnt get farther component swapping with another correctly functioning relay than that

Loose leaf switch machine screws

Closed Problem: The 4th from the left under playfield relay (“lite rte 1”) is getting activated when the release wotan muchroom bumper leaf swith is closed, but it isnt staying energizing hard enough to keep the circut closed. I think the issue is mechanical. There is some play in the opposite direction from which the switch closes (pushing it left as opposed to right). Ruled out the spring on the bottom of the relay and the little hook the spring grabs on, but didnt get farther component swapping with another correctly functioning relay than that

Non-issue, watch play pf other machines on the internet, this is the expected state.

Closed Problem: Front pop bumper is lit for 100 points all the time. Only supposed to activate when the skill shot is hit

Symptom of another issue, closing

Closed Problem: 3rd thousand light by the wotan ball lock doesnt stay in a lit state. Confirmed the bulb is good so likely a cracked or weak solder joint on the lamp holder.

Routine: Clean the playfield