Location changed: Floor → Majik Street
Worked both in switch test and live play.
GI problem was all bulb and socket issues. Replaced every flaky bulb and cleaned any socket that was still sus with alcohol. Total of 15 bulbs replaced.
Left outlane switch doesn’t notice ball
G.I is out. Nudging and flipping turns it on brighter but still low
Power switch is DPST. Marked 5A 125V, 3A 250V. 0.45" diameter, about 0.5"length of thread. Mounted on plate about 0.09".
Identified that connector P3 on solenoid driver board is intermittent, and reboots if you wiggle it. It contains the 5V line to the MPU board. We should replace the connector and see if it still restarts after that.
Last night and today I caught Star Trek rebooting spontaneously. Just now it did it twice in a few minutes after being quiet for 90 minutes