Cleaned out the peaky dead bugs in the machine. Wiped down the front glass and monitor while I was at it. They were dirty!
To access/remove the front glass, open the back of the machine and undo the latches on either side of the control panel toward the front of the cabinet. The control panel will rotate down and you can carefully remove the glass. Use rubber triangles for the glass as we would for playfield glass. Remember to re-latch the control panel in place when done servicing the game.
Might be the dumbest report to date, but there is a bug(s?) in the machine. Unsure how to access.
Closed problem report
Still having issues registering quarters. Customer put 2 in and it only registered 1. Sorry to be the bearer of bad news! Unsure if this should be marked as minor or major.
Coin slot stopped working again, I added another coin mech to the right slot and put tape over the left one and replaced the burnt out light for the right coin slot. Hopefully NOW its good 🤞🏻
I cleared the jammed coins in the return and pushed the black lever piece up all the way. It is taking coins successfully now without jamming. Hopefully it is good now!!
Issue is happening again despite just getting worked on. high priority, as the coin op tournament begins tomorrow Friday 6/12 Machine not taking or registering quarters
Josh replaced one of the coin mechs yesterday but said it didn’t work. When I tried it this morning, it did work. So either Josh fixed it or it was a case of spontaneous remission.
high priority, as the coin op tournament begins tomorrow Friday 6/12 Machine not taking or registering quarters
Closed problem report