Login
Autofire plunger will get stuck in the upright position occasionally. I think it can get in the way of the right flipper as well? Pushing the right flipper button will slightly move the plunger, and I had the flipper switch and button get dislocated.
No media.
The bracket that held the autofire plunger solenoid was too far over to the right causing the flipper switch to get caught. I moved the bracket over as far left as it could go, now the plunger is more centered and the issue is gone.
This Pinside thread talks about this particular issue
https://pinside.com/pinball/forum/topic/getaway-right-flipper-switch-hits-plunger
Its possible that the right flipper button is aftermarket and pushes further than the stock one would?
Easiest way to reproduce problem is to hold down right flipper button while firing the ball with shifter.