All Activity Problems Logs Parts
Work

Status changed: Good → Fixing

Work

Replaced the lights

Closed Problem: Some GI lights are out + pop bumper lights
Work

All left flipper contacts are short to each other

Photo
Open Problem: Left flipper is very weak
Work

Physically separated end of stroke switch and it was still closed

Photo
Open Problem: Left flipper is very weak
Work

End of stroke switch mechanism clearly OK

Photo
Photo
Open Problem: Left flipper is very weak
Work

Status changed: Broken → Good

Work 0.5h ·

Left flipper was misaligned, possibly due to coil sleeve being too short. Couldn’t get coil sleeve out. Instead swapped spring washer to coil to stop end to make coil align better. Works for now.

Right flipper was a little sticky, so I disassembled it, cleaned the coil sleeve and pin. Seems better.

Photo
Closed Problem: Customer reported left flipper not working at all and a “smokey” smell. I turned off the machine.
Work 0.5h ·

No obvious source of smoke, but the left flipper was pretty weak. Took it apart to clean and align it as best I could, but that didn’t help. The plunger is kinda chewed up, so I’ll order a flipper rebuild kit for the machine.

Closed Problem: Customer reported left flipper not working at all and a “smokey” smell. I turned off the machine.
Work

Status changed: Good → Broken

Work

Closed problem report

Closed Problem: Guest reported that left flipper is intermittently working