Ball is struggling to launch all the way (weak) on the first try. Usually fine on the 2nd attempt. Machine still playable.
One of the PC fans sounds sick on startup. Let’s replace it before it fails.
Monitor has gone black.
William walked away from RFM while the light self test was on. When I came back it was still active, but the monitor was out. Powering off and on didn’t help. Measured power going to CPU at 120v, 0.32A. Measured power going to monitor at 120v, 0.07A, which seems quite low. We later discovered that the flipper and launch solenoids were out (and presumably the rest, but didn’t test). The root cause is still a mystery.
Ball still getting stuck behind drop target. I suspect that switch is intermittent too. Let’s replace it when we do the others.
Top left rollover switch is stuck in lower position, should be bent back into place
Guest reported right flipper sticking
Several lights are out on the playfield
Back left rollover light is out. Machine is still totally playable though (will register when you roll over it, such as the skill shot).
Ball sometimes sticks. I think the drop target doesn’t always drop.
