Closed problem report

Backglass swapped, old backglass is in workshop

Ball was stuck on playfield. I shook it a bit.

Wiggling fuses turned power back on. Scored fuse holder with a file, pinched the arms tighter with needle nose pliers. It seems fine now.

There is corrosion apparent on the fuse holder.

50v fuse was blown. On inspection, it was a 3A fuse that should have been 10A. Replaced and it’s back in operation

Closed problem report

Re-opened problem report

Closed problem report

It was discovered that a wire had broken free of it’s terminal. Old wire fragments removed. Terminal cleaned. Soldered wire back onto terminal. Left flipper “power” is now consistent with right flipper.