Carom · Logs · The Flip

Fixing Storage Report

All Activity Problems Logs Parts

Location changed: Workshop → Storage

Status changed: Unknown → Fixing

Closed problem report

Closed Problem: Use ~100psi compressed air outdoors to clean dust off control cabinet wires and score cabinet wires 110V compressor is in workroom Wear goggles and a dust mask

Bulb was good, but I blew the filament

Open Problem: Test lamp, identify bulb type. Use variac for testing.

Solenoids in back cabinet score assembly

Open Problem: Identify solenoid types. Only a few have visible labels.

Pulled score assembly out of back box and used compressed air to try to make wire colors more visible

Closed Problem: Use ~100psi compressed air outdoors to clean dust off control cabinet wires and score cabinet wires 110V compressor is in workroom Wear goggles and a dust mask

Wiped and polished springs and guides as best as I could, but there’s still significant corrosion

Closed Problem: Playfield guide springs are rough and need polishing

Cleaned and waxed entire play field

Closed Problem: Playfield is dirty

Submitted parts request to replace all 8 springs around the edges of the playfield. Removed all springs and put them in ziplock bag in machine

Open Problem: Broken springs. Most are 1/4in diameter. The side springs are 4” not including the end loops Note some springs are mounted on only one end, as ball guides.

Closed problem report

Closed Problem: Playfield bumper springs are rough and need polishing