Problem One: The door is shocking people. There is some short that is causing the metal on the replay button/door to be live.

Problem 2: Still not starting right. The Replay button doesn’t seem to be doing anything. And when it does happen to initiate something, the S/Q relay is not latching/unlatching consistently and there is continuous motor movement.

Soldering Work: The yellow wire looked suspicious, and it just fell off one of the contacts when touched. Oliver resoldered the Yellow Wire and soldered the middle to clean it up. Didn’t solve the shocking issue.

Switch work: Oliver closed the Coin Door switch (making it normally closed) to see if that helped the start button do something. It didn’t.

Fuse Replacement: The 10amp Lightbox fuse blew at some point during all this. It was replaced.