Description
- It seems to be playing decently, but:
- TODO check and replace bulbs
- TODO is the 10k startup sequence right?
- When starting up, the 10k reset behaves oddly, going through more positions than necessary. Is that right?
- Took me a while to remember that the start solenoid doesn’t trigger any switches, so it looks different on the diagram
- It seems to rotate through the zero positions, but never the nearest one
- There are 3 zero positions. Let’s call them A, B, and C, which are at the 11, 3, and 7 o-clock spots.
- I did a few trials. Starting at 0A, it went to 0C 4/4. Starting at 0B, it went 2/4 to 0A and 2/4 to 0C. Starting at OC it went to 0A 1/2 and 0B 1/2.
- I notice that it sticks some. Hitting the 50k bumper causes 5 triggers, but doesn’t always advance 5. It seems to be sticker around 12 oclock.
- This stickyness could account for the erratic behavior, so let’s fix that.
- TODO clean and lube the 10k stepper.
- TODO number 4 horse doesn’t always light the place position
- TODO bend the horse targets
- TODO clean and wax the playfield before closing up
- TODO millions light alignment
- TODO special light and special work?
- TODO number 1 horse is sticky on return
-
Media
No media.