Login
Left flipper fuse blows on fliptronics board. Unsure of why yet. Measuring coils on flipper showed less than an ohm, where it should be around 4. Everything was connected so it can’t be confirmed what though. Possible suspects, diode on solenoid, something on fliptronics board, coil itself
No media.
Replaced left and right flipper solenoids and the blown 3 volt fuse on the fliptronics board. other flipper components actually looked pretty good so i didn’t end up using the rebuild kit.
Flippers seem to be working smoothly now, the right one might benefit from slight tightening/ realignment.
Left flipper coil is shorted and melted. It’s not the original to the machine, and a different model. Needs to be replaced with correct one and ensure that there isn’t anything that caused it to fail
